Posted August 12, 2011
Components used outdoors must always function flawlessly - even under severe weather condition. The degree of component protection is reflected in the Ingress Protection rating, e.g. IP67. Learn more about IP ratings here:
http://fxr.com/resource-library/application-notes/ingress-protection-ip-ratings
Posted March 29, 2011
The advent of wireless with its tightly grouped, high power, high frequency signals and the associated high sensitivity receivers has created many unanticipated PIM (Passive Intermodulation) problems. PIM is caused by improper design of the passive, sharing transmission line by the receive signal. This brief overview describes a few of the problems and solutions encountered by Microlab/FXR in its efforts to supply PIM-free wireless components.
Posted January 11, 2011
In this webinar, the concept of the Signal Tapper will be introduced. This webinar will also include an analysis of the performance characteristics and recommended design revisions that will enable tremendous cost savings without any sacrifice to over-all system performance.
Posted September 21, 2010
This webinar will discuss the different approaches to in-building communications systems with a primary focus on the advantages of the passive DAS. We will discuss the use of different types of components and also draw attention to the contribution to PIM from various sources.